White salt bloom
Efflorescence removal for Sydney brick
Efflorescence is the white, chalky bloom that appears on brick, mortar and render. It’s salt carried out by water, so we look for where the water is getting in as well as cleaning it off.
What it looks like
- White or grey powder on the brick face
- A chalky film that smudges when touched
- Patches that return or spread after rain
What causes it
- Water carrying natural salts through the masonry
- Salts left behind when the water dries at the surface
- Moisture from the ground, gutters or poor drainage
Before you scrub
Hosing it off again and again puts more water into the wall, and water is what brings the salts out. Strong acid can also mark or dull the brick.
How we remove it
Our approach
- We look at the stain on site and confirm what it is.
- We test the treatment on a small, hidden patch first.
- We treat the wall, matched to the stain and the brick.
Will it come back?
It can return if moisture keeps moving through the wall. If the cause is a leaking gutter, damp or wet mortar, we’ll tell you, because the water needs fixing too.
Questions
Before you ask
Is efflorescence harmful to the brick?
Usually the salts sit on the surface and are a cosmetic issue. The moisture that brings them out is worth checking, and we’ll point it out if we see it.
Why does the white come back after I clean it?
If water is still passing through the wall, it brings more salts with it. Fixing the source of the moisture is what stops the cycle.
Other stains
Not quite your stain?
- Green or yellow brick stainsVanadium stain removal
- Orange and brown rust marksIron and rust stain removal
- Brown or black brick stainsManganese stain removal
- Hard white lime runsCalcium and lime run removal
- Cement smears and burnt brickMortar smear and acid burn repair
- Paint, spray paint and tagsPaint and graffiti removal
- Green and black growthMoss, mould and algae removal
Let’s look at your brick
A few quick questions, then we call you to talk through the job.

